...  The Brush Specialists!
Home About Us Products Enquiry Form Contact Us

JSF Strip Brush Construction
Strip brush is produced by putting filament into a "U" shaped metal base.

The strip brush can be supplied in a straight length, it can be helically formed, or, it can be wound into a coil and then supplied as loose spiral strip brush.

The strip brush can also be spirally wound directly onto a shaft or tubular core, and then fastened at each end to form a cylindrical, spirally wound, roller brush.

 

 

Helically Formed Strip Brush

Loose Spiral Strip Brush

Straight strip brush can be helically formed.  Light and heavy-duty helical strip brushes are assembled in modular form (as shown on the diagram and photo).  This type of construction is used mainly in the Josco conveyor belt cleaning brushes.
Strip brush is easily replaced and extra spiders can be added to form additional widths if required.

Straight strip brush can be spirally wound to form loose spiral strip brush of any brush outside diameter or inside bore diameter.

Loose spiral strip brush may be fitted onto a refillable core, shaft or supplied loose for fitting to customer's existing shaft.  Josco engineers will assist with recommendations on fastening the strip brush to the core or shaft.

 

 

Straight Strip Brush for Flat Section Extrusion

Straight strip brush can be fitted into the Josco designed flat aluminium extrusion.  This flat aluminium extrusion will only accept the Josco 8mm size strip brush.  Flat aluminium extrusion can be supplied in lengths of 20' and module widths of 5".  This design allows for a medium density block type brush.

 Applications include golf mats, flat sweeping brushes, block brushes etc.

 

 

Cylindrical, Spirally Wound, Roller Brushes
Straight strip brush can be spirally wound onto a core or shaft to dimensions as required by the customer. 

The strip brush is wound according to customer application.  For light work requirements, we recommend the strip to be wound 'open' thus achieving a less dense, but more flexible brush.  For applications requiring heavy work or where greater pressure is essential, better results are achieved when the strip is closely wound.

Examples of these products are shown below:

Click to enlarge   Click to enlarge   Click to enlarge

 

 

How to Order Straight Strip Brush Lengths
The essential details when ordering strip
brush are as follows:

1.    O.H. - Overall Height
2.    T - Trim
3.    L - Length
4.    W - Thickness of the strip at the base
5.    Nature and diameter of the filament
6.    Use for which the brush is intended

 Strip brush can be supplied in forms as below

Standard Form Tang Strip

 

 

Dimensions of Strip Brush Sizes

Typical Strip Brush Holders

Strip brush can be manufactured in 6 different sizes, as shown.  The size selected is dependant on the amount of filament required to solve the problem application.  Josco engineers can help with decision.

 8mm Holder               4mm Holder
Aluminium extrusions

Fabricated Steel

Straight strip brushes may need to fastened to the work piece.  Josco can provide holders as shown or other more heavy duty holders.  Ask for assistance.

 

Road Sweeping
Brooms		 Punched Construction Brushes Cylindrical Roller Brushes Strip Brush Construction Car, Bus, Truck and Train Washing Brushes
Conveyor Belt Cleaning Brushes Special Wheel Brushes Tube & Pipe Internal Cleaning Brushes Fruit Washing, Waxing, Drying and Polishing Brushes Fruit Roller De-Waxing Brushes
Abrasive Nylon Brushes Spray Suppressant Seal Brushes Dust & Rodent Seal Brushes Exciting New Product Coming Soon! Other Special Brushes and Machinery

back to top

Josco Surface Finishing Products Pty Ltd
2-5 Piping Lane, Lonsdale, South Australia, 5160
Free call 1800 064 061* within Australia
Phone (61) 08 8326 7355   Fax (61) 08 8326 7514
E-mail:  brushinfo@josco.com.au

Copyright © 2003 Josco Surface Finishing Products Pty Ltd.  All rights reserved.