 |
 |
|
|
|
 |
 |
 |
 |
 |
 |
 |
     |
home > products > brushware > testing on the job > |
||||||
|
|
|
||||||
|
brushware testing on the job |
|||||||
|
►
safety |
|
effect desired | course of action advised | ||||
| To cut faster |
► Use a
larger diameter brush ► Increase RPM ► Use a brush with a heavier wire gauge ► Use a shorter trim |
||||||
| A brush should always be tested on the job to ensure the best results. The chart on the right will help you to select the right brush for your purpose | To produce a finer finish |
► Use
a brush with lighter wire gauge ► Finish with Josco polishing mops and compounds |
|||||
| To reach all parts of an irregular surface | ► Use a brush with a longer trim | ||||||
| To remove burrs | ► Use a brush with a shorter trim | ||||||
| To produce a more even finish | ► Use a holding fixture, hand operated or automatic | ||||||
|
© Copyright, Josco, 2003 | All rights reserved | Legal and Privacy Statements |
|