home >   products >   abrasives >   mounted points - overhang >

Mounted points - overhang

► mounted points overhang 

MOUNTED POINT OVERHANG

Maximum operating speeds are dependent on the shape and size of the wheel, the size of the shank and amount of overhang.  The maximum RPM figures shown on the mounted points page are based on using an overhang 'O' of not more than 1/2" (12.7mm)

If an overhang of more than 1/2" (12.7mm) is used the maximum permissible operating speeds are reduced.  See the Health and Safety Executive publication ref. HS(G) 17 and the European Safety Co. issued by the Federation of European Producers of Abrasive Products (FEPA No 12GB74)

© Copyright, Josco, 2003   |   All rights reserved   |   Legal and Privacy Statements