Brumby Jumbo Metal Polishing Kit
For polishing aluminium, brass, steel, stainless steel, copper and most other metals.
The Brumby Jumbo Metal Polishing Kit is ideal for polishing
aluminium, brass, steel, stainless steel, copper and most other
metals.
The kit contains: 1 x 50mm Sisal Buff, 1 x 50mm Loose Leaf
Calico Buff, 1 x 100mm Sisal Buff, 1 x 100mm Loose Leaf Calico
Buff, 1 x Fastcut Compound, 1 x SS Compound, 1 x Arbor
Instructions for use:
- Mount spindle onto drill and run in forward direction.
- Apply compound into buff whilst running. Use sisal buff with grey compound and use loose leaf buff with white compound. Apply for a few seconds only.
- Bring buff into contact with the work piece. Move back and forth across the job with light pressure.
- Do not apply too much compound. It is better to apply a little compound more frequently.
- Remove any excess residue with hot water and household detergent.
WARNING: Run in forward direction only. Running drill in reverse will cause nut to come loose. Not to be used on plastic coated, black, coloured or gun-metal finishes. This will cause damage to the surface.
Specifications
Part number: JMPKIT
Barcode: 9314028350179
Max RPM: 3,000
Suitable tools
The Brumby Jumbo Metal Polishing Kit is ideal for polishing
aluminium, brass, steel, stainless steel, copper and most other
metals.
The kit contains: 1 x 50mm Sisal Buff, 1 x 50mm Loose Leaf
Calico Buff, 1 x 100mm Sisal Buff, 1 x 100mm Loose Leaf Calico
Buff, 1 x Fastcut Compound, 1 x SS Compound, 1 x Arbor
Instructions for use:
- Mount spindle onto drill and run in forward direction.
- Apply compound into buff whilst running. Use sisal buff with grey compound and use loose leaf buff with white compound. Apply for a few seconds only.
- Bring buff into contact with the work piece. Move back and forth across the job with light pressure.
- Do not apply too much compound. It is better to apply a little compound more frequently.
- Remove any excess residue with hot water and household detergent.
WARNING: Run in forward direction only. Running drill in reverse will cause nut to come loose. Not to be used on plastic coated, black, coloured or gun-metal finishes. This will cause damage to the surface.
Specifications
Part number: JMPKIT
Barcode: 9314028350179
Max RPM: 3,000
