 |
 |
|
|
|
 |
 |
 |
 |
 |
 |
 |
    |
||||
|
|
|
|||
|
Polishing - fitting tapered spindles |
||||
|
► techniques
on polishing |
||||
 |
STEP 1 Remove outer guard, grinding wheel and inner guard from the side of the machine that the tapered spindle is to be fitted |
|||
 |
STEP 2 Screw on the tapered spindle NOTE: the internal thread of the spindle is counter bored to allow the spindle to cover the entire grinder shaft length |
|||
 |
STEP 3 Carefully screw the buff onto the tapered spindle with the thickest flange facing inwards. Screw on as far as buff will reasonably fit |
|||
 |
STEP 4 Turn on bench grinder and the buff will tighten further against the tapered spindle |
|||
|
© Copyright, Josco, 2003 | All rights reserved | Legal and Privacy Statements |
|