Brumby Fastcut Cutting Compound (Grey)

For cutting back light scratch marks on copper, brass and stainless steel prior to polishing.

Brumby Fastcut Cutting Compound FASTCUTCARD

Brumby Fastcut Cutting Compound is best used to “cut back” light scratch marks on copper, brass and stainless steel, steel and aluminium prior to polishing when in use with a Josco Stitched Sisal Buff.

 

Different metals have varying characteristics, and to achieve the best possible results it is essential that the correct polishing compound and buff are selected for the job.

Directions for use:

  1. Most buffs have a tapered centre bore, and
    may be mounted on the left or right of your
    grinder using a tapered spindle.
  2. Select the correct buffs and compounds
    for your job. Initial cutting can be done with a
    fastcut compound and either a stitched sisal
    or a stitched rag buff followed by a polishing
    compound and a loose leaf buff. For best
    results, never use different compounds on
    the one buff – keep a separate buff for each
    compound.
  3. Apply the compound across the face of the
    rotating buff for a few seconds, taking care
    not to apply too much compound which will
    overload the buff. It is far better to apply a little
    compound more frequently than to over dress
    the buff.
  4. After applying the compound to the buff,
    bring the work piece into contact with the buff
    and with light pressure, move back and forth
    across the job.
  5. After polishing, remove any compound
    residue left on the work piece with mineral
    turpentine or methylated spirits, or warm soapy
    water.
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Specifications

Part number: FASTCUTCARD

Barcode: 9314028001507
Size: Standard
Colour: Grey

Suitable tools

  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Brumby Fastcut Cutting Compound is best used to “cut back” light scratch marks on copper, brass and stainless steel, steel and aluminium prior to polishing when in use with a Josco Stitched Sisal Buff.

 

Different metals have varying characteristics, and to achieve the best possible results it is essential that the correct polishing compound and buff are selected for the job.

Directions for use:

  1. Most buffs have a tapered centre bore, and
    may be mounted on the left or right of your
    grinder using a tapered spindle.
  2. Select the correct buffs and compounds
    for your job. Initial cutting can be done with a
    fastcut compound and either a stitched sisal
    or a stitched rag buff followed by a polishing
    compound and a loose leaf buff. For best
    results, never use different compounds on
    the one buff – keep a separate buff for each
    compound.
  3. Apply the compound across the face of the
    rotating buff for a few seconds, taking care
    not to apply too much compound which will
    overload the buff. It is far better to apply a little
    compound more frequently than to over dress
    the buff.
  4. After applying the compound to the buff,
    bring the work piece into contact with the buff
    and with light pressure, move back and forth
    across the job.
  5. After polishing, remove any compound
    residue left on the work piece with mineral
    turpentine or methylated spirits, or warm soapy
    water.

Specifications

Part number: FASTCUTCARD

Barcode: 9314028001507
Size: Standard
Colour: Grey