Brumby SSX Polishing Compound (Green)

The Brumby SSX Polishing Compound is ideal for polishing applications on copper, brass and stainless steel where a high gloss finish is desired. For the best results, use the compound with a Josco Loose Leaf Calico Buff.

Josco also has three other types of polishing compounds available in its range, in both standard and large sizes. They are all intended for use on surfaces without major blemishes, resulting in little metal removal and will achieve a bright result. Any small scratches that are produced by cutters can subsequently be removed with the use of a finishing compound.

Directions for use:

1. Most buffs have a tapered centre bore, and
   may be mounted on the left or right of your
   grinder using a tapered spindle.
2. Select the correct buffs and compounds
   for your job. Initial cutting can be done with a
   fastcut compound and either a stitched sisal
   or a stitched rag buff followed by a polishing
   compound and a loose leaf buff. For best
   results, never use different compounds on
   the one buff – keep a separate buff for each
   compound.
3. Apply the compound across the face of the
   rotating buff for a few seconds, taking care
   not to apply too much compound which will
   overload the buff. It is far better to apply a little
   compound more frequently than to over dress
   the buff.
4. After applying the compound to the buff,
   bring the work piece into contact with the buff
   and with light pressure, move back and forth
   across the job.
5. After polishing, remove any compound
   residue left on the work piece with mineral
   turpentine or methylated spirits, or warm soapy
   water.

For more information on the combination of the SSX polishing compound with calico buffs, please see Josco’s polishing how-to manual here.

Specifications

Part number: SSXCARD

Barcode: 9314028001101
Size: Standard
Colour: Green