Brumby Tripoli Cutting Compound (Brown)

For general purpose cutting on copper, aluminium and most metals.

Brumby Tripoli Cutting Compound (Brown)

Brumby Tripoli Cutting Compound is best used as a general
purpose cutting compound for copper, brass, aluminium and most metals, and is for use with a Josco Stitched Rag or Loose
Leaf Calico Polishing Buff.

 

Different metals have varying characteristics, and to achieve the
best possible results it is essential that the correct polishing
compound and buff are selected for the job.

 

Directions for use:

  1. Most buffs have a tapered centre bore, and
    may be mounted on the left or right of your
    grinder using a tapered spindle.
  2. Select the correct buffs and compounds
    for your job. Initial cutting can be done with a
    fastcut compound and either a stitched sisal
    or a stitched rag buff followed by a polishing
    compound and a loose leaf buff. For best
    results, never use different compounds on
    the one buff – keep a separate buff for each
    compound.
  3. Apply the compound across the face of the
    rotating buff for a few seconds, taking care
    not to apply too much compound which will
    overload the buff. It is far better to apply a little
    compound more frequently than to over dress
    the buff.
  4. After applying the compound to the buff,
    bring the work piece into contact with the buff
    and with light pressure, move back and forth
    across the job.
  5. After polishing, remove any compound
    residue left on the work piece with mineral
    turpentine or methylated spirits, or warm soapy
    water.
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Specifications

Part number: TRIPOLICARD

Barcode: 9314028001408
Size: Standard
Colour: Brown

Suitable tools

  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Brumby Tripoli Cutting Compound is best used as a general
purpose cutting compound for copper, brass, aluminium and most metals, and is for use with a Josco Stitched Rag or Loose
Leaf Calico Polishing Buff.

 

Different metals have varying characteristics, and to achieve the
best possible results it is essential that the correct polishing
compound and buff are selected for the job.

 

Directions for use:

  1. Most buffs have a tapered centre bore, and
    may be mounted on the left or right of your
    grinder using a tapered spindle.
  2. Select the correct buffs and compounds
    for your job. Initial cutting can be done with a
    fastcut compound and either a stitched sisal
    or a stitched rag buff followed by a polishing
    compound and a loose leaf buff. For best
    results, never use different compounds on
    the one buff – keep a separate buff for each
    compound.
  3. Apply the compound across the face of the
    rotating buff for a few seconds, taking care
    not to apply too much compound which will
    overload the buff. It is far better to apply a little
    compound more frequently than to over dress
    the buff.
  4. After applying the compound to the buff,
    bring the work piece into contact with the buff
    and with light pressure, move back and forth
    across the job.
  5. After polishing, remove any compound
    residue left on the work piece with mineral
    turpentine or methylated spirits, or warm soapy
    water.

Specifications

Part number: TRIPOLICARD

Barcode: 9314028001408
Size: Standard
Colour: Brown