Josco Jumbo Metal Polishing Kit

For polishing aluminium, brass, steel, stainless steel, copper and most other metals.

Josco Jumbo Metal Polishing Kit is ideal for polishing
aluminium, brass, steel, stainless steel, copper and most other
metals.

 

The kit contains: 1 x 50mm Sisal Buff, 1 x 50mm Loose Leaf
Calico Buff, 1 x 100mm Sisal Buff, 1 x 100mm Loose Leaf Calico
Buff, 1 x Fastcut Compound, 1 x SS Compound

 

Instructions for use:

  1. Mount spindle onto drill and run into forward direction.
  2. Apply compound into buff whilst running. Apply for a few seconds only. Do not apply too much compound – it is better to apply a little compound more frequently. Use sisal buff with grey compound and loose leaf buff with white compound.
  3. Bring buff into contact with the work piece. Move back and forth across the job with light pressure.
  4. Remove any excess residue with hot water and household detergent.
WARNING: Run in forward direction only. Running drill in reverse will cause nut to come loose. Not to be used on plastic coated, black, coloured or gun-metal finishes. This will cause damage to the surface.
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Specifications

Part number: JPK2

Barcode: 9314028002719
Max RPM: 3,000

Suitable tools

  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Josco Jumbo Metal Polishing Kit is ideal for polishing
aluminium, brass, steel, stainless steel, copper and most other
metals.

 

The kit contains: 1 x 50mm Sisal Buff, 1 x 50mm Loose Leaf
Calico Buff, 1 x 100mm Sisal Buff, 1 x 100mm Loose Leaf Calico
Buff, 1 x Fastcut Compound, 1 x SS Compound

 

Instructions for use:

  1. Mount spindle onto drill and run into forward direction.
  2. Apply compound into buff whilst running. Apply for a few seconds only. Do not apply too much compound – it is better to apply a little compound more frequently. Use sisal buff with grey compound and loose leaf buff with white compound.
  3. Bring buff into contact with the work piece. Move back and forth across the job with light pressure.
  4. Remove any excess residue with hot water and household detergent.
WARNING: Run in forward direction only. Running drill in reverse will cause nut to come loose. Not to be used on plastic coated, black, coloured or gun-metal finishes. This will cause damage to the surface.

Specifications

Part number: JPK2

Barcode: 9314028002719
Max RPM: 3,000